Lantronix LX6 manual Configuration Using Web Manager, Accessing Web Manager

4:Configuration Using Web Manager

This chapter describes how to configure the XPort Pro Lx6 embedded device server using Web Manager, the Lantronix browser-based configuration tool. The unit’s configuration is stored in non- volatile memory and is retained without power. All changes take effect immediately, unless otherwise noted. It contains the following sections:

Accessing Web Manager

Web Manager Components

Navigating Web Manager

Accessing Web Manager

Note: You can also access the Web Manager by selecting the Web Configuration tab on the DeviceInstaller application window.

To access Web Manager, perform the following steps:

1.Open a standard web browser. Lantronix supports the latest versions of Internet Explorer, Mozilla Firefox, Safari or Chrome web browsers.

2.Enter the IP address or hostname of the XPort Pro Lx6 in the address bar. The IP address may have been assigned manually using DeviceInstaller (see the XPort Pro Lx6 Embedded Device Server Quick Start Guide) or automatically by DHCP.

3.Enter your username and password. The factory-default username is “admin” and “PASS” is the default password. The Device Status web page displays configurations including network settings, line settings, tunneling settings, and product information.

XPort® Pro Lx6 Embedded Device Server User Guide 18