BPG510 User Interface Guide
WAN Configuration
The WAN Configuration screen allows you to set the BPG510 to operate with your DSL/cable modem.
CAUTION
Saving the WAN Configuration reboots the BPG510.
Device Operating Mode
This section allows you to select BPG510 as a switch or a router device. If you connect BPG
If you are connecting BPG510 as a client behind another router then you will select BPG510 as a SWITCH.
Obtain WAN configuration dynamically
Select this option if you do not have a static IP address; the BPG510 will automatically obtain its IP address and other information from your service provider.
Specify fixed WAN configuration
If your provider gave you a static IP address, select this option and fill out all the information below:
IP ADDRESS | Enter the IP address you received from your service provider in the following |
| format: XXX.XXX.XXX.X |
SUBNET MASK | Enter the subnet mask you received from your service provider in the following |
| format: XXX.XXX.XXX.X |
DEFAULT | Enter the default gateway address in the following format: XXX.XXX.XXX.X This |
Page 12 of 27 | © 8x8 Inc., 2005 |
