BPG510 User Interface Guide
Router Configuration
Dynamic Routing
Dynamic routing allows the BPG510 to learn routing tables from other network devices by means of the Routing Information Protocol (RIP). With RIP, network devices can broadcast messages containing information on the status of network connections.
RX Mode means we listen to and process RIP messages, TX Mode means we send RIP information to other routers.
RX Mode
Select ENABLED to have the BPG510 process any RIP messages it receives from other network devices. Select DISABLED to have the BPG510 ignore any RIP messages it receives.
TX Mode
Select ENABLED to have the BPG510 broadcast RIP messages to other network devices. Select DISABLED to prevent the BPG510 from broadcasting RIP messages.
Static Routing
Static routing lets you configure particular IP addresses to be routed to the LAN port or the WAN port of the adapter.
Subnet Mask
Enter the subnet mask of the destination device.
Page 18 of 27 | © 8x8 Inc., 2005 |
