8x8 BPG510 manual Call Log, Country, NTP Server, Time Zone, Adjust clock for daylight savings

BPG510 User Interface Guide

Country

Select the country the BPG510 is currently operating in.

NTP Server

Enter the Network Time Protocol (NTP) server you want the BPG510 to use to automatically update the date and time settings. If you don't enter an NTP server, the time and date stamp on Caller ID messages may not work correctly.

Time Zone

Select the time zone where the BPG510 is currently operating.

Adjust clock for daylight savings

Select this box to have the BPG510 automatically adjust the time one hour for Daylight Standard Time (DST). If your area does not observe DST, do not enable this option.

Call Log

The Call Log displays the last 10 calls received or transmitted by the BPG510.

DATE/TIME	Displays the date and time of the call.
LINE	Displays the line the call used.
I/O	Displays whether the call was inbound our outbound.
NUMBER	Displays the phone number of the other party to the call.
CALL-ID	Displays the Call-Id header value in the SIP messages. Your service provider

© 8x8 Inc., 2005 Page 23 of 27