8x8 manual Opening the BPG510s Configuration Utility

BPG510 User Interface Guide

Opening the BPG510's Configuration Utility

Your BPG510 VoIP phone provides a browser-based configuration utility. You can configured the phone using the same web browser you use to surf the Internet. To open your phone's configuration utility, follow these instructions:

1.Connect a computer with a web browser directly to the LAN port of your BPG510. (You may be able to connect to the BPG510 through a router or wireless access point, but if you have any difficulty connecting, try connecting directly to BPG510’s LAN Ethernet port.)

2.Be sure that this computer is configured to dynamically get an IP address (e.g., has the DHCP client enabled).

3.Type the IP address of your BPG510’s into the address bar of your web browser. The default IP address of your BPG510 is 192.168.88.1. Then press the ENTER key. You will be prompted to enter a password (the default password is admin).

Note: If you change the LAN IP address of your phone, be sure to make note of it.

4. You should now see the your BPG510’s System Information Screen:

Page 4 of 27 © 8x8 Inc., 2005