BPG510 User Interface Guide
Reserved Ports
The adaptor reserves ports
Port Forwarding to LAN
PORT RANGE | Enter the first and last numbers of the port range you wan to map to |
| this computer. If you want to forward a single port only, enter the |
| same port number in both spaces. |
| NOTE: Port ranges are consecutive. If you need to assign non- |
| consecutive ports to a computer, you must enter that computer |
| twice with different port ranges. |
PROTOCOL | Select TCP, UDP, or BOTH (TCP/UDP) according to the needs of your |
| network. |
DESTINATION | Enter the IP address of the computer you want to use as the host |
ADDRESS | computer for these services, then click ADD. |
Filtering Configuration
The Filtering Configuration screen lets you block certain computers from accessing the Internet or from accessing certain services on the Internet. You can filter computers by IP address or by MAC address.
Page 20 of 27 | © 8x8 Inc., 2005 |
