8x8 BPG510 manual DMZ Host Configuration, Filtered LAN IP Addresses

BPG510 User Interface Guide

Filtered LAN IP Addresses

Enter the IP addresses you want to block from accessing the Internet connection. Select Both. The computer at the IP address you specified will now be blocked from Internet.

DMZ Host Configuration

If you want to have one computer on your network receive all un-forwarded data that arrives at your firewall (for instance, because you want to monitor network traffic on the WAN side or you have one computer running too many services to configure all the forwarded ports), you can establish a single computer as a DMZ. Any data that is not in a port forwarding range will be sent to the DMZ. Follow the steps below to configure a computer as a DMZ.

CAUTION

The BPG510 cannot protect a computer configured to operate as the DMZ from malicious access.

Traffic sent to the DMZ is still subject to translation by NAT. This means that applications that are damaged by NAT will still be affected.

© 8x8 Inc., 2005 Page 21 of 27