8x8 BPG510 manual PPPoE, Authentication, Settings

	BPG510 User Interface Guide
GATEWAY	is the IP address of your service provider's router.
DNS ADDRESS	Enter the IP address of the Domain Name System (DNS) server used by your
	service provider. Use the following format: XXX.XXX.XXX.X

PPPoE

The WAN PPPoE screen configures the BPG510 to support point-to-point protocol over Ethernet.

CAUTION

Saving the PPPoE Configuration reboots the BPG510.

Enable PPPoE

Select YES to activate the PPPoE protocol.

Authentication

Enter the USERNAME and PASSWORD you use to login to the PPPoE service.

Settings

Enter the SERVICE NAME and AC NAME required by your ISP. If you are not sure, leave this blank.

© 8x8 Inc., 2005 Page 13 of 27