Wireless Access Point User Guide
| | |
set description | -- Set Access Point Description |
set dhcpMode | -- Set Dhcp Mode |
set domainsuffix -- Set Domain Name Server Suffix |
set dtim -- Set Data Beacon Rate (DTIM) |
set enableANI | -- Turn Adaptive Noise Immunity Control On/Off |
set encryption | -- Set Encryption Mode |
set extendedchanmode | -- Set Extended Channel Mode |
set factorydefault -- Restore to Default Factory Settings |
set firStepLvl | -- Set ANI Parameter for FirStepLevel |
set fragmentthreshold | -- Set Fragment Threshold |
set frequency | -- Set Radio Frequency (MHz) |
set gateway-- Set Gateway IP Address |
set gbeaconrate | -- Set 11g Beacon Rate |
set groupkeyupdate | -- Set Group Key Update Interval (in Seconds) |
set gdraft5-- Set 11g Draft 5.0 compatibility |
set hostipaddr | -- Set Host IP address |
set ipaddr -- Set IP Address
set ipmask -- Set IP Subnet Mask set key -- Set Encryption Key
set keyentrymethod -- Select Encryption Key Entry Method set keysource -- Select Source Of Encryption Keys
set login -- Modify Login User Name set minimumrate -- Set Minimum Rate
set macAuth-- Set Mac Authentication Enable/Disable set nameaddress -- Set Name Server IP address
set noiseImmunityLvl -- Set ANI Parameter for Noise Immunity Level
set ofdmTrigHigh -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control set ofdmTrigLow -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
| | |
set ofdmWeakSigDet | -- Set ANI Parameter for OFDM Weak Signal Detection |
set overRidetxpower | -- Set Tx power override |
set operationMode-- Set operation Mode |
set password | -- Modify Password |
set passphrase | -- Modify Passphrase |
set pktLogEnable -- Enable Packet Logging set power -- Set Transmit Power
set quietAckCtsAllow -- Allow Ack/Cts frames during quiet period set quietDuration-- Duration of quiet period