LevelOne 11g PoE Wireless Access Point, WAP-0005 Enabling Encryption, Wireless Networks Screen

PC and Server Configuration

•Your network administrator can advise you of the correct settings for each network. 802.1x networks typically use EAP-TLS. This is a dynamic key system, so there is no need to enter key values.

Enabling Encryption

To enable encryption for a wireless network, follow this procedure:

1.Click on the Wireless Networks tab.

Figure 45: Wireless Networks Screen

2.Select the wireless network from the Available Networks list, and click Configure.

3.Select and enter the correct values, as advised by your Network Administrator.

For example, to use EAP-TLS, you would enable Data encryption, and click the checkbox for the setting The key is provided for me automatically, as shown below.

59