LevelOne WAP-0005, 11g PoE Wireless Access Point manual Data Admin Login Screen, Admin Connections

Wireless Access Point User Guide

Data - Admin Login Screen

Login

User Name	Enter the login name for the Administrator.
Change Admin Password	If you wish to change the Admin password, check this field
	and enter the new login password in the fields below.
New Password	Enter the desired login password.
Repeat New Password	Re-enter the desired login password.
Admin Connections
Allow Admin connections	If checked, then Admin connections via the Wireless interface
via wired Ethernet only	will not be accepted.
Enable HTTP	Enable this to allow admin connections via HTTP. If enabled,
	you must provide a port number in the field below. Either
	HTTP or HTTPS must be enabled.
HTTP Port Number	Enter the port number to be used for HTTP connections to this
	device. The default value is 80.
Enable HTTPS	Enable this to allow admin connections via HTTPS (secure
	HTTP). If enabled, you must provide a port number in the
	field below. Either HTTP or HTTPS must be enabled.
HTTPS Port Number	Enter the port number to be used for HTTPS connections to
	this device. The default value is 443.
Enable Telnet	If desired, you can enable this option. If enabled, you will able
	to connect to this AP using a Telnet client. You will have to
	provide the same login data (user name, password) as for a
	HTTP (Web) connection.

70