LevelOne 11g PoE Wireless Access Point, WAP-0005 Data Config File Screen, Backup, Restore

Page 77

Other Settings & Features

Config File

This screen allows you to Backup (download) the configuration file, and to restore (upload) a previously-saved configuration file.

You can also set the Wireless Access Point back to its factory default settings.

To reach this screen, select Config File in the Management section of the menu.

Figure 55: Config File Screen

Data - Config File Screen

Backup

Save a copy of

Once you have the Access Point working properly, you should

current settings

back up the settings to a file on your computer. You can later

 

restore the Access Point's settings from this file, if necessary.

To create a backup file of the current settings:

Click Back Up.

If you don't have your browser set up to save downloaded files automatically, locate where you want to save the file, rename it if you like, and click Save.

 

Restore

 

 

 

 

Restore saved settings

To restore settings from a backup file:

 

 

from a file

1.

Click Browse.

 

 

 

2.

Locate and select the previously saved backup file.

 

 

 

3.

Click Restore

 

 

 

 

 

 

73

Image 77
Contents Users Guide Page Table of Contents Overview General Problems Wireless Access PointOverview Wireless LAN Terminology Overview Command ReferenceIntroduction Features of your Wireless Access PointAdvanced Features Security FeaturesIntroduction Physical Details Package ContentsRear Panel Procedure InstallationRequirements RequirementsUsing PoE Power over Ethernet Using PoE Power over EthernetPage Setup using the Windows Utility Access Point SetupInstallation OverviewButtons Wireless Access PointsPass-phrase just works for Hex and not for Setup ProcedurePassword Dialog Setup using a Web BrowserIf you cant connect Buttons Access ControlData Access Control Screen Data Trusted Wireless Stations Trusted Wireless StationsSelect None Security ProfilesEdit AddProfile Data Security Profiles ScreenPrimary Profile IsolationSecurity Profile Screen Wireless BandProfile Data Security SystemSetup Using MAC authentication Security Settings NoneRadius MAC Authentication Setup Data Radius-based MAC Authentication Screen Radius-based MAC authentication ScreenUAM authentication External UAM authentication InternalData UAM Screen UAM ScreenSecurity Settings WEP Data WEP Screen Data WPA-PSK Screen Security Settings WPA-PSKNetwork Key WPA EncryptionGroup Key Update Pairwise Key UpdateUpdate Group key When any membershipWPA-802.1x Wireless Security Security Settings WPA-802.1xWPA-802.1x Data WPA-802.1x ScreenEvery Update Report802.1x Wireless Security Security Settings802.1x Data 802.1x ScreenUAM Data System Screen System ScreenIdentification IP AddressWins Server Name/IP Address Basic Settings Screen Wireless ScreensData Basic Settings Screen Wireless ModeBridge Mode AP ModeBroadcast Ssid MAC Address fieldParameters Data Advanced Settings Screen Advanced SettingsBasic Rate Options802.11b Security PC and Server ConfigurationUsing WEP Using WPA-PSK Wireless Station Configuration Using WPA-802.1xRadius Server Configuration 802.1xServices Installation 802.1x Server Setup Windows 2000 ServerWindows 2000 Domain Controller Setup Components Screen CA Screen Dhcp server configurationIP Address Screen Certificate Authority Screen Certificate Authority SetupActive Directory Screen Group Policy Screen Service Screen Internet Authentication Service Radius SetupAuthentication Screen Dial-in Screen Remote Access Login for UsersClient Certificate Setup 802.1x Client Setup on Windows XPWireless CA Screen Identifying Information Screen Encryption Settings 802.1x Authentication SetupEnabling Encryption Wireless Networks ScreenProperties Screen Using 802.1x Mode without WPA Status Screen Operation and StatusOperation Wireless Access PointData Status Screen Security ProfilesStatistics Screen 4GHz WirelessData Statistics Screen System Up TimeControl Multicast PacketsManagement Clients Profile StatusBand Data Activity LogData Activity Log Data Station List Screen Station ListStation List Refresh ButtonAdmin Login Screen Access Point ManagementAdmin Connections Data Admin Login ScreenLogin Data Auto Config/Update Screen Auto Config/UpdateConfiguration on this AP Perform AutoAuto Update Data Config File Screen Config FileBackup RestoreRevert to factory DefaultsData Log Settings Screen Log Settings SyslogData Rogue AP Screen Enable DetectionRogue APs General Data Snmp ScreenManagers TrapsTo perform the Firmware Upgrade Upgrade FirmwareWireless Access Point SpecificationsHardware Specifications Wireless SpecificationsFeature Details Software SpecificationsMessage Log FCC Radiation Exposure Statement FCC StatementTo Find the Access Points IP Address TroubleshootingGeneral Problems Wireless Access Point User Guide Normally, no changes need to be made Checking TCP/IP Settings Windows 9x/MEWindows TCP/IP Using Specify an IP Address Using DhcpWindows NT4.0 TCP/IP Checking TCP/IP Settings Windows NT4.0Obtain an IP address from a Dhcp Server Network Configuration Win Checking TCP/IP Settings WindowsUsing a fixed IP Address Use the following IP Address Network Configuration Windows XP Checking TCP/IP Settings Windows XPUsing Dhcp Wireless LAN Terminology About Wireless LANsAd-hoc Mode Infrastructure ModeWPA-802.1x Channels802.1x Using the CLI Serial Port Command Line InterfaceUsing the CLI Telnet CLI Port Settings Command ReferenceWireless Access Point User Guide Display 11g Beacon Rate Wireless Access Point User Guide Mem -- system memory statistics Set 11g Beacon Rate Appendix C Windows TCP/IP Wireless Access Point User Guide
Related manuals
Manual 94 pages 34.52 Kb