LevelOne 11g PoE Wireless Access Point, WAP-0005 manual Data Status Screen, Security Profiles

Operation and Status

Data - Status Screen

Access Point

Access Point Name	The current name will be displayed.
MAC Address	The MAC (physical) address of the Wireless Access Point.
Domain	The region or domain, as selected on the Basic Wireless screen.
Firmware Version	The version of the firmware currently installed.
TCP/IP
IP Address	The IP Address of the Wireless Access Point.
Subnet Mask	The Network Mask (Subnet Mask) for the IP Address above.
Gateway	Enter the Gateway for the LAN segment to which the Wireless
	Access Point is attached (the same value as the PCs on that LAN
	segment).
DHCP Client	This indicates whether the current IP address was obtained from a
	DHCP Server on your network.
	It will display "Enabled" or "Disabled".
Wireless
SSID	The current SSID.
Channel/Frequency	The Channel currently in use is displayed.
Wireless Mode	The current mode (e.g. 802.11g) is displayed.
AP Mode	The current Access Point mode is displayed.
Bridge Mode	The current Bridge mode is displayed.
Security Profiles
Name	This displays the current name of each security profile.
SSID	This displays the SSID associated with the profile.
Status	This indicates whether or not the profile is enabled.
Buttons
Statistics	Click this to open a sub-window where you can view Statistics on
	data transmitted or received by the Access Point.
Profile Status	Click this to open a sub-window which displays further details
	about each security profile.
Log	Click this to open a sub-window where you can view the activity
	log.
Stations	Click this to open a sub-window where you can view the list of
	all current Wireless Stations using the Access Point.

63