LevelOne 11g PoE Wireless Access Point, WAP-0005 manual Data 802.1x Screen

Setup

Data - 802.1x Screen

802.1x

Radius Server Address	Enter the name or IP address of the Radius Server on your
	network.
Radius Port	Enter the port number used for connections to the Radius
	Server.
Client Login Name	This read-only field displays the current login name, which is
	the same as the name of the Access Point. The Radius Server
	must be configured to accept this login.
Shared Key	This is used for the Client Login on the Radius Server. Enter the
	key value to match the Radius Server.
WEP Key Size	Select the desired option:
	• 64 Bit - Keys are 10 Hex (5 ASCII) characters.
	• 128 Bit - Keys are 26 Hex (13 ASCII) characters.
	• 156 Bit - Keys are 32 Hex (16 ASCII) characters.
Dynamic WEP Key	Click this if you want the WEP keys to be automatically
	generated.
	• The key exchange will be negotiated. The most widely
	supported protocol is EAP-TLS.
	• The following Key Exchange setting determines how often
	the keys are changed.
	• Both Dynamic and Static keys can be used simultaneously,
	allowing clients using either method to use the Access
	Point.
Key Exchange	This setting if only available if using Dynamic WEP Keys. If
	you want the Dynamic WEP keys to be updated regularly,
	enable this and enter the desired lifetime (in minutes).
Static WEP Key	Enable this if some wireless clients use a fixed (static) WEP
(EAP-MD5)	key, using EAP-MD5.
	Note that both Dynamic and Static keys can be used
	simultaneously, allowing clients using either method to use the
	Access Point.
WEP Key	Enter the WEP key according to the WEP Key Size setting
	above. Wireless stations must use the same key.
WEP Key Index	Select the desired index value. Wireless stations must use the
	same key index.
Radius Accounting	Enable this if you want this Access Point to send accounting
	data to the Radius Server.
	If enabled, the port used by your Radius Server must be entered
	in the Radius Accounting Port field.
Update Report every ...	If Radius accounting is enabled, you can enable this and enter
	the desired update interval. This Access Point will then send
	updates according to the specified time period.

33