LevelOne WAP-0005, 11g PoE Wireless Access Point manual Auto Update

Wireless Access Point User Guide

Respond to Auto-	If checked, this AP will respond to "Auto Configuration"
configuration request by	requests it receives. If not checked, "Auto Configuration"
other AP	requests will be ignored.
Provide login name and	If enabled, the login name and password on this AP is
password	supplied the the AP making the Auto-configuration request. If
	disabled, the AP making the Auto-configuration request will
	keep its existing login name and password.
Provide "Respond to	If enabled, the "Respond to Auto-configuration" setting on
Auto-configuration"	this AP is supplied the the AP making the Auto-configuration
setting	request. If disabled, the AP making the Auto-configuration
	request will keep its existing setting.
Auto Update
Check for Firmware	If enabled, this AP will check to see if a Firmware (FW)
upgrade	upgrade is available on the specified FTP Server. If enabled:
	• Enter the desired time interval (in days) between checks.
	• Select the desired option for installation (see next item).
	• Provide the FTP server information.
Install...	Select the desired option:
	• Install FW if different version found
	If selected, then if the firmware file at the specified
	location is different to the current installed version, the
	FW will be installed. This allows "Downgrades" -
	installing an older version of the FW to replace the
	current version.
	• Install later version only
	If selected, then the firmware file at the specified location
	will only be installed if it is a later version.
FTP Server address	Enter the address (domain name or IP address) of the FTP
	Server.
Firmware pathname	Enter the full path (including the FW filename) to the the FW
	file on the FTP Server.
FTP Login Name	Enter the login name required to gain access to the FTP
	Server.
FTP Password	Enter the password for the login name above.

While firmware upgrading, no wireless connection is allowed. Please must check before upgrading.

72