LevelOne WAP-0005, 11g PoE Wireless Access Point manual Package Contents, Physical Details

Page 8

Wireless Access Point User Guide

Package Contents

The following items should be included:

•WAP-0005

•Power Adapter

•Quick Start Guide

•CD-ROM containing the on-line manual and setup utility.

If any of the above items are damaged or missing, please contact your dealer immediately.

Physical Details

Front Panel LEDs

Status

Power

LAN

Wireless

LAN

Figure 2: Front Panel

On - Error condition.

Off - Normal operation.

Blinking - During start up, and when the Firmware is being upgraded.

On - Normal operation.

Off - No power

On - The LAN (Ethernet) port is active.

Off - No active connection on the LAN (Ethernet) port.

Flashing - Data is being transmitted or received via the corresponding LAN (Ethernet) port.

On - Idle

Off - Error- Wireless connection is not available.

Flashing - Data is being transmitted or received via the Wireless access point. Data includes "network traffic" as well as user data.

4

Image 8

Contents Users Guide Page Table of Contents Wireless Access Point Overview General ProblemsOverview Wireless LAN Terminology Overview Command ReferenceFeatures of your Wireless Access Point IntroductionSecurity Features Advanced FeaturesIntroduction Package Contents Physical DetailsRear Panel Installation ProcedureRequirements RequirementsUsing PoE Power over Ethernet Using PoE Power over EthernetPage Access Point Setup Setup using the Windows UtilityInstallation OverviewWireless Access Points ButtonsSetup Procedure Pass-phrase just works for Hex and not forSetup using a Web Browser Password DialogIf you cant connect Buttons Access ControlData Access Control Screen Trusted Wireless Stations Data Trusted Wireless StationsSecurity Profiles Select NoneEdit AddData Security Profiles Screen ProfilePrimary Profile IsolationWireless Band Security Profile ScreenProfile Data Security SystemSetup Using MAC authentication Security Settings NoneRadius MAC Authentication Setup Radius-based MAC authentication Screen Data Radius-based MAC Authentication ScreenUAM authentication Internal UAM authentication ExternalUAM Screen Data UAM ScreenSecurity Settings WEP Data WEP Screen Security Settings WPA-PSK Data WPA-PSK ScreenNetwork Key WPA EncryptionPairwise Key Update Group Key UpdateUpdate Group key When any membershipSecurity Settings WPA-802.1x WPA-802.1x Wireless SecurityData WPA-802.1x Screen WPA-802.1xUpdate Report EverySecurity Settings 802.1x Wireless SecurityData 802.1x Screen 802.1xUAM System Screen Data System ScreenIdentification IP AddressWins Server Name/IP Address Wireless Screens Basic Settings ScreenData Basic Settings Screen Wireless ModeAP Mode Bridge ModeBroadcast Ssid MAC Address fieldParameters Advanced Settings Data Advanced Settings ScreenBasic Rate Options802.11b Security PC and Server ConfigurationUsing WEP Using WPA-PSK Using WPA-802.1x Wireless Station ConfigurationRadius Server Configuration 802.1xServices Installation 802.1x Server Setup Windows 2000 ServerWindows 2000 Domain Controller Setup Components Screen Dhcp server configuration CA ScreenIP Address Screen Certificate Authority Setup Certificate Authority ScreenActive Directory Screen Group Policy Screen Internet Authentication Service Radius Setup Service ScreenAuthentication Screen Remote Access Login for Users Dial-in Screen802.1x Client Setup on Windows XP Client Certificate SetupWireless CA Screen Identifying Information Screen 802.1x Authentication Setup Encryption SettingsWireless Networks Screen Enabling EncryptionProperties Screen Using 802.1x Mode without WPA Status Screen Operation and StatusOperation Access Point WirelessData Status Screen Security Profiles4GHz Wireless Statistics ScreenData Statistics Screen System Up TimeControl Multicast PacketsManagement Clients Profile StatusBand Data Activity LogData Activity Log Station List Data Station List ScreenStation List Refresh ButtonAccess Point Management Admin Login ScreenAdmin Connections Data Admin Login ScreenLogin Auto Config/Update Data Auto Config/Update ScreenConfiguration on this AP Perform AutoAuto Update Config File Data Config File ScreenBackup RestoreDefaults Revert to factoryLog Settings Syslog Data Log Settings ScreenData Rogue AP Screen Enable DetectionRogue APs Data Snmp Screen GeneralManagers TrapsUpgrade Firmware To perform the Firmware UpgradeSpecifications Wireless Access PointHardware Specifications Wireless SpecificationsSoftware Specifications Feature DetailsMessage Log FCC Statement FCC Radiation Exposure StatementTo Find the Access Points IP Address TroubleshootingGeneral Problems Wireless Access Point User Guide Normally, no changes need to be made Checking TCP/IP Settings Windows 9x/MEWindows TCP/IP Using Dhcp Using Specify an IP AddressChecking TCP/IP Settings Windows NT4.0 Windows NT4.0 TCP/IPObtain an IP address from a Dhcp Server Checking TCP/IP Settings Windows Network Configuration WinUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings Windows XP Network Configuration Windows XPUsing Dhcp About Wireless LANs Wireless LAN TerminologyAd-hoc Mode Infrastructure ModeChannels WPA-802.1x802.1x Using the CLI Serial Port Command Line InterfaceUsing the CLI Telnet Command Reference CLI Port SettingsWireless Access Point User Guide Display 11g Beacon Rate Wireless Access Point User Guide Mem -- system memory statistics Set 11g Beacon Rate Appendix C Windows TCP/IP Wireless Access Point User Guide

Related manuals

Manual 94 pages 34.52 Kb