5.1 Wireless Connection Status
When you open the Configuration Utility, the system will scan all the channels to find all the access points/stations within the accessible range of your adapter and automatically connect to the wireless device with the highest signal strength. From the screen, you may know all the infomration about the wireless connection.
Parameter | Description |
|
|
Mode | Station – Set the USB adapter as a wireless client. |
| Access Point – Turns the USB adapter to function as a wireless |
| AP. Please refer to Section 6.5 for the AP settings. |
Network Adapter | Display the product information of the USB adapter. |
Available Network | Display all the SSID and Signal Strength of wireless stations |
| nearby. To |
| “Refresh”. |
| There are two ways to automatically make the connection |
| between the USB adapter and the wireless station on the list. |
| 1. |
| 2. Select the station you intend to connect and then click |
| “Connect this site“. |
Current Network Information Display the information about the wireless network this adapter is
16