LevelOne WNC-0304USB, 11g USB Adapter w/LCD WiFi Detector user manual Maximum Power-Saving mode

Page 30

 

saving mode when it is idle, but some components of the adapter

 

is still alive. In this mode, the power consumption is larger than

 

“Maximum Power-Saving“ mode.

PSP XLink Mode

XLink is an infrastructure tunneling program which allows you to play Ad-

 

hoc PSP multiplayer games through the Internet.

WMM QoS Mode

The primary goal of Quality of Service (QoS) is to provide priority

 

including dedicated bandwidth, controlled jitter and latency (required by

 

some real-time and interactive traffic), and improved loss characteristics.

 

WiFi Multimedia (WMM) adds prioritized QoS capabilities to Wi-Fi

 

networks and optimizes its performance when multiple concurring

 

applications, each with different latency and throughput requirements,

 

compete for network resources.

Fragementation Threshold

The value defines the maximum size of packets, any packet size

 

larger than the value will be fragmented. If you have decreased

 

this value and experience high packet error rates, you can

 

increase it again, but it will likely decrease overall network

 

performance. Select a setting within a range of 256 to 2346 bytes.

 

Minor change is recommended.

RTS / CTS Threshold

Minimum packet size required for an RTS/CTS (Request To

 

Send/Clear to Send). For packets smaller than this threshold, an

 

RTS/CTS is not sent and the packet is transmitted directly to the

 

WLAN. Select a setting within a range of 0 to 2347 bytes. Minor

 

change is recommended

 

 

28

Image 30
Contents LevelOne Contents Features IntroductionSpecifications Package Contents How to charge the battery of Wi-Fi Detector How to use the Wi-Fi Detector Page Seek/Lock How to install the driver and utility Install the Configuration UtilityPage Page Install the USB adapter Click Finish to complete the installation Using the Configuration Utility First WaySecond Way How to configure the utility Wireless Connection Status Bssid General Connection Setting Ssid Page WEP Setting WEP and WPA EncryptionPage Page 2 WPA/WPA2 Setting Page WEP KEY Setting Advanced Settings Continuous Access Mode CAM The adapter will always setMaximum Power-Saving mode Software AP Mode AP Connection StatusAP General Connection Setting WEP Should use the shorter preamble type MAC Address Filter Link Installation Page Page Page Page What is the Ieee 802.11b standard? TroubleshootingWhat is the Ieee 802.11g standard? What does Ieee 802.11 feature support?What is WEP? What is Infrastructure?What is BSS ID? What is TKIP?What is the maximum AP that can be detected? What is DSSS?What is FHSS?And what are their differences?What is Spread Spectrum? What is the maximum detection distance?