WEP KEY Setting

Parameter	Description

Connect Information	It is the setting for WPA mode.
Protocol	This adapter supports three kinds of protocol for authentication
	including TLS, TTLS and PEAP. These three protocols require a
	certificate which is provided by the Certificate Server. PEAP and
	TTLS require a set of user name and password in addition. To get
	the certificate and the personal user name and password, please
	contact with your administrator.
	TLS – Select a certificate from the “Certificate“ list.
	PEAP – Input the “User Name“ and “Password“ and also select a
	certificate from the “Certificate“ list.
	TTLS – Input the “User Name“, “Password“ and “Phase2Auth“ and
	also select a certificate from the “Certificate“ list.
User Name	It is the setting for PEAP protocol.
Password	It is the setting for PEAP protocol.
Phase2Auth	It is the setting for TTLS protocol, including PAP, CHAP,
	MSCHAP and MSCHAPv2
Pre-shared Key	It is the setting for WPA-PSK mode. Input a 8 to 63 digits of ASCII
	format to be the password for the authentication within the
	network.
Certificate	All the available certificates for TLS or PEAP will display in the
	list. Please select a proper certificate for the wireless
	authentication.

Parameter	Description

WEP Key	If the AP uses WEP data encryption function, please clcik “WEP
	KEY SETTING“ to setup the WEP key.
WEP KEY SETTING	Setup the four sets of WEP key by clicking the button.
Change/Apply	Clcik “Change“ will enable you to setup the WPA setting. In the
	meantime, the button will change to “Apply“ for you to confirm
	your settings.