LevelOne 11g USB Adapter w/LCD WiFi Detector, WNC-0304USB user manual Seek/Lock

Page 9

In “lock mode” the detector constantly re-detects and refreshes the signal strength to this specific SSID so the user can move around to find the optimal spot with strongest signal.

Press and hold the “Seek/Lock” button for 4 seconds to unlock the “lock mode”.

Seek/Lock

Image 9

Contents LevelOne Contents Introduction FeaturesSpecifications Package Contents How to charge the battery of Wi-Fi Detector How to use the Wi-Fi Detector Page Seek/Lock Install the Configuration Utility How to install the driver and utilityPage Page Install the USB adapter Click Finish to complete the installation First Way Using the Configuration UtilitySecond Way How to configure the utility Wireless Connection Status Bssid General Connection Setting Ssid Page WEP and WPA Encryption WEP SettingPage Page 2 WPA/WPA2 Setting Page WEP KEY Setting Continuous Access Mode CAM The adapter will always set Advanced SettingsMaximum Power-Saving mode AP Connection Status Software AP ModeAP General Connection Setting WEP Should use the shorter preamble type MAC Address Filter Link Installation Page Page Page Page What is the Ieee 802.11g standard? TroubleshootingWhat is the Ieee 802.11b standard？ What does Ieee 802.11 feature support？What is BSS ID？ What is Infrastructure？What is WEP？ What is TKIP?What is Spread Spectrum？ What is DSSS？What is FHSS？And what are their differences？What is the maximum AP that can be detected? What is the maximum detection distance?