LevelOne WNC-0304USB user manual How to charge the battery of Wi-Fi Detector

Page 6

2 How to charge the battery of Wi-Fi Detector

1.Remove the cap from the Wi-Fi Detector, slide the power switch to the “ON” position and carefully insert the USB connector into any available USB port on your computer. You will see the recharging screen.

The battery strength indicator will be animated while the Wi-Fi detector is being recharged.

The “Link/Act” icon will blink when the Wi-Fi detector is being used as a wireless USB adapter to surf the internet.

2.When the Wi-Fi detector is finished recharging it will automatically stop charging the battery. When it is finished recharging the battery you will see “Charge Finish” displayed on the LCD and the battery strength indicator will stop blinking.

3.If you slide the power switch to the “OFF” position when in recharging, the Wi-Fi detector will stop recharging the battery and you will see “Stop charging” displayed on the LCD and the battery strength indicator will stop blinking.

zPlease note that, this adapter cannot be charged through hub devices, charging through PC only. Charging through hub devices might result damage to the battery.

4

Image 6
Contents LevelOne Contents Features IntroductionSpecifications Package Contents How to charge the battery of Wi-Fi Detector How to use the Wi-Fi Detector Page Seek/Lock How to install the driver and utility Install the Configuration UtilityPage Page Install the USB adapter Click Finish to complete the installation Using the Configuration Utility First WaySecond Way How to configure the utility Wireless Connection Status Bssid General Connection Setting Ssid Page WEP Setting WEP and WPA EncryptionPage Page 2 WPA/WPA2 Setting Page WEP KEY Setting Advanced Settings Continuous Access Mode CAM The adapter will always setMaximum Power-Saving mode Software AP Mode AP Connection StatusAP General Connection Setting WEP Should use the shorter preamble type MAC Address Filter Link Installation Page Page Page Page What is the Ieee 802.11b standard? TroubleshootingWhat is the Ieee 802.11g standard? What does Ieee 802.11 feature support?What is WEP? What is Infrastructure?What is BSS ID? What is TKIP?What is the maximum AP that can be detected? What is DSSS?What is FHSS?And what are their differences?What is Spread Spectrum? What is the maximum detection distance?