LevelOne WNC-0304USB, 11g USB Adapter w/LCD WiFi Detector user manual

	3	4
2
		5

1

6

7

8

The Icons on the LCD display are displayed as follows:

1.Operating Channel: Indicates the current operating channel of the detected Wi-Fi signal.

2.Number of AP’s Detected: the left digit indicates which detected Wi-Fi signal is currently displayed and the right digit indicates the total amount of Wi-Fi signals detected.

3.Encryption indicator: “WEP” for WEP encryption, “WPA” for WPA encryption, and “WPA2” for WPA2 encryption and “OPEN” indicates it is a non-encrypted signal.

4.“G” indicates the signal is a 802.11g wireless signal. “B” indicates the signal is a 802.11b wireless signal.

5.Signal strength indicator with 5 bars indicating the signal strength.

6.“In” indicates the signal is an infrastructure mode signal, “Ad” indicates the signal is an Ad-hoc mode signal.

7.Battery indicator with 3 bars indicating battery power. When the indicator is empty, please recharge the detector by inserting it into PC’s USB port.

8.SSID Indicator: Displays the SSID of the detected Wi-Fi signal, if the SSID is too long the SSID indicator will scroll to display the complete SSID.

4.If the user wishes to re-scan/re-detect wireless SSID, just simply press “Seek/Lock” button once. If the user wishes to re-detect a specific discovered SSID, then the user has to hold down the “Seek/Lock” button for 4 seconds to enter “lock mode”. When the detector is in “lock mode” an icon with a capitalized “L” appears in the top middle corner of the screen.

6