LevelOne FCS-1060, WCS-2060 user manual Before You Use This Product

Page 2

Before You Use This Product

The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use.

It is important to first verify that all contents received are complete according to the list in the "Package Contents" chapter. Take notice of the warnings in “Quick installation guide” before the Network Camera is installed, then carefully read and follow the instructions in the “Installation” chapter to avoid damages due to faulty assembly and installation. This also ensures the product is used properly as intended.

The Network Camera is a network device and its use should be straightforward for those who have basic network knowledge. The “Troubleshooting” chapter in the Appendix provides remedies to the most common errors in set up and configuration. You should consult this chapter first if you run into a system error.

The Network Camera is designed for various applications including video sharing, general security/surveillance, etc. The “How to Use” chapter suggests ways to best utilize the Network Camera and ensure proper operations. For the creative and professional developers, the "URL Commands of The Network Camera" chapter serves to be a helpful reference to customize existing homepages or integrating with the current web server.

For paragraphs preceded by the reader should use caution to understand

completely the warnings. Ignoring the warnings may result in serious hazards or injuries.

2

Image 2
Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Installation Hardware installationTo install in Ethernet To install in wireless LAN WCS-2060 OnlySoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability ConfigurationClient Settings Main Screen with Camera ViewView capabilities Pan speed Pan/tilt control buttonsAs Play Tilt speedPan PatrolClient settings Url http//Network Camera/client.html For Viewing by Mobile Phone Administrator’s capabilityFine-tuning for Best Performance Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesFor Best Real-time Video Images Build a security application Protect Network Camera by passwordsOpening accounts for new users Software revision upgrade Page Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressRtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Maintenance CalibrateReset and restore TroubleshootingURL commands of the Network Camera Status LEDGet server parameter values Method GET/POSTSet server parameter values ReturnAvailable parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank255.255.255.0 Blank192.168.0.99 5556 5545558 Auto Live.sdp Group Wireless restartDefault Open0.0 00000000Group IPFilter 255.255.255.255512000 For 60Hz only12200 AAC4 for computerGamr for mobile Blank Blank IP address Camera ControlScript.vssx 514Application page CGI command RecallBegintime WeekdayTimemethod EndtimeCapture single snapshot Account managementSystem logs Privilege=confPost data Configuration fileUpgrade firmware Page Technical specifications NetworkingMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty