LevelOne FCS-1060, WCS-2060 user manual Tkip AES

Page 32

Note: When 22(“), 3C(<) or 3E(>) are input in network key, the key format can’t be changed to ASCII format.

“Algorithm” Choosing one of the following algorithm for WPA-PSK modes

▶“TKIP”

▶“AES”

“Pre-shared Key” Entering a key in ASCII format. The length of the key is 8 ~ 63

Some invalid settings may cause the system failing to respond. Change the configuration only if necessary and consult with your network supervisor or experienced users for correct settings. Once the system has lost contact, refer to Appendix A for reset and restore procedures.

<url> http://<Network Camera>/setup/wireless.html

<Network Camera> is the domain name or original IP address of the Network Camera.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Installation Hardware installationTo install in Ethernet To install in wireless LAN WCS-2060 OnlySoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Configuration Client SettingsPrimary user’s capability Main Screen with Camera ViewView capabilities Pan/tilt control buttons As PlayPan speed Tilt speedPan PatrolClient settings Url http//Network Camera/client.html For Viewing by Mobile Phone Administrator’s capabilityFine-tuning for Best Performance Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesFor Best Real-time Video Images Build a security application Protect Network Camera by passwordsOpening accounts for new users Software revision upgrade Page Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Maintenance CalibrateTroubleshooting URL commands of the Network CameraReset and restore Status LEDGet server parameter values Method GET/POSTSet server parameter values ReturnWirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddGroup Security Blank255.255.255.0 Blank192.168.0.99 5556 5545558 Live.sdp Group Wireless restart DefaultAuto Open00000000 Group IPFilter0.0 255.255.255.255512000 For 60Hz only12200 AAC4 for computerGamr for mobile Blank Blank Camera Control Script.vssxIP address 514Application page CGI command RecallWeekday TimemethodBegintime EndtimeCapture single snapshot Account managementSystem logs Privilege=confPost data Configuration fileUpgrade firmware Page Technical specifications NetworkingMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty
Top Page Image Contents