LevelOne WCS-2060, FCS-1060 user manual System parameters

Page 27

System parameters

"Host name" The text displays the title at the top of the main page.

“Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed.

"Keep current date and time" Click on this to reserve the current date and time of the Network Camera. An internal real-time clock maintains the date and time even when the power of the system is turned off.

"Sync with computer time" Synchronizes the date and time of the Network Camera with the local computer. The read-only date and time of the PC is displayed as updated.

“Manual” Adjust the date and time according to what is entered by the Administrator. Notice the format in the related fields while doing the entry.

“Automatic” Synchronize with the NTP server over the Internet whenever the Network Camera starts up. It will fail if the assigned time-server cannot be reached.

“NTP server” Assign the IP address or domain name of the time-server. Leaving the text box blank connects the Network Camera to the default time-servers.

"Time zone" Adjust the time with that of the time-servers for local settings.

“Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server.

Remember to click on to immediately validate the changes. Otherwise, the correct time will not be synchronized.

27

Image 27

Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Hardware installation InstallationTo install in wireless LAN WCS-2060 Only To install in EthernetSoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View ConfigurationClient Settings Primary user’s capabilityView capabilities Tilt speed Pan/tilt control buttonsAs Play Pan speedPatrol PanClient settings Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Page Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Calibrate MaintenanceStatus LED TroubleshootingURL commands of the Network Camera Reset and restoreMethod GET/POST Get server parameter valuesReturn Set server parameter valuesYyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group SecurityBlank 192.168.0.99255.255.255.0 554 55585556 Open Live.sdp Group Wireless restartDefault Auto255.255.255.255 00000000Group IPFilter 0.0For 60Hz only 512000AAC4 for computer Gamr for mobile12200 Blank Blank 514 Camera ControlScript.vssx IP addressRecall Application page CGI commandEndtime WeekdayTimemethod BegintimeAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Upgrade firmwarePost data Page Networking Technical specificationsMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty