LevelOne WCS-2060, FCS-1060 user manual Ddns

Page 33

DDNS

“Enable DDNS” This option turns on the DDNS function.

“Provider” The provider list contains four hosts that provide DDNS services. Please connect to the service provider’s website to make sure the service charges.

“Host Name” If the User wants to use DDNS service, this field must be filled. Please input the hostname that is registered in the DDNS server.

“Username/E-mail”The Username or E-mail field is necessary for logging in the DDNS server or notify the User of the new IP address. Note: when this field is input as “Username” the following field must be input as “Password”.

“Password/Key” Please input the password or key to get the DDNS service.

“Save” Click on this button to save current settings for the DDNS service and UPnP function.

<url> http://<Network Camera>/setup/ddns.html

<Network Camera> is the domain name or original IP address of the Network Camera.

33

Image 33

Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Hardware installation InstallationTo install in wireless LAN WCS-2060 Only To install in EthernetSoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Client Settings ConfigurationPrimary user’s capability Main Screen with Camera ViewView capabilities As Play Pan/tilt control buttonsPan speed Tilt speedPatrol PanClient settings Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Page Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Calibrate MaintenanceURL commands of the Network Camera TroubleshootingReset and restore Status LEDMethod GET/POST Get server parameter valuesReturn Set server parameter valuesSkip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddBlank Group SecurityBlank 192.168.0.99255.255.255.0 554 55585556 Default Live.sdp Group Wireless restartAuto OpenGroup IPFilter 000000000.0 255.255.255.255For 60Hz only 512000AAC4 for computer Gamr for mobile12200 Blank Blank Script.vssx Camera ControlIP address 514Recall Application page CGI commandTimemethod WeekdayBegintime EndtimeAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Upgrade firmwarePost data Page Networking Technical specificationsMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty