LevelOne FCS-1060, WCS-2060 user manual Motion detection

Page 42

Motion detection

“Enable motion detection” Check this option to turn on motion detection.

Click on this button to add a new window. At most three windows can exist simultaneously. Use the mouse to click, hold, and drag the window frame to resize or the title bar to move. Clicking on the ‘x’ at the upper right-hand corner of the window to delete the window. Remember to save in order to validate the changes.

Click on this button to save the related window settings. A graphic bar will rise or fall depending on the image variation. A green bar means the image variation is under monitoring level and a red bar means the image variation is over monitoring level. When the bar goes red, the detected window will also be outlined in red. Going back to the homepage, the monitored window is hidden but the red frame shows when motion is detected.

"Window Name" The text will show at the top of the window.

“Sensitivity” This sets the endurable difference between two sequential images. “Percentage” This sets the space ratio of moving objects in the monitoring window. Higher sensitivity and small percentage will allow easier motion detection.

The following figure shows the screen when is clicked. The monitoring window has been outlined in red and the graphic bar goes red since the goldfish is moving.

42

Image 42
Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Installation Hardware installationTo install in Ethernet To install in wireless LAN WCS-2060 OnlySoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability ConfigurationClient Settings Main Screen with Camera ViewView capabilities Pan speed Pan/tilt control buttonsAs Play Tilt speedPan PatrolClient settings Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Page Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressRtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Maintenance CalibrateReset and restore TroubleshootingURL commands of the Network Camera Status LEDGet server parameter values Method GET/POSTSet server parameter values ReturnAvailable parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security BlankBlank 192.168.0.99255.255.255.0 554 55585556 Auto Live.sdp Group Wireless restartDefault Open0.0 00000000Group IPFilter 255.255.255.255512000 For 60Hz onlyAAC4 for computer Gamr for mobile12200 Blank Blank IP address Camera ControlScript.vssx 514Application page CGI command RecallBegintime WeekdayTimemethod EndtimeCapture single snapshot Account managementSystem logs Privilege=confConfiguration file Upgrade firmwarePost data Page Technical specifications NetworkingMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty