LevelOne WCS-2060, FCS-1060 user manual Preset function area

Page 39

Preset function area

Current position”, If the User wants to save the current view as a preset location, enter a name for each of the current video view at “current position” and click on the “Add” button. The camera allows for 20 preset locations.

Preset position” This keeps a list for preset positions. Clicking on the “Delete” button will remove the current selected position from the preset list.

Set as home” Click on the button will set the current aimed position as home of the Network Camera. Each time the Network Camera reboots or after calibration, it will automatically aim to the defined home position.

Default home” Restore home position to factory default home by clicking on this button. ”Dwelling time” The value set here specifies:

1.The stop time of each preset location during auto patrol of the Network Camera.

2.The stay time at the most left and the most right positions when the Network Camera is doing auto panning.

Patrol selection”, After the User has saved a list of preset positions, the “Preset locations” box will also keep a list of the preset positions. And once the “Select>” button is clicked, the “Selected location” box will keep a list of the patrol stops. The “Remove” button removes the preset position from the patrol stops. The “UP”, “DOWN” buttons adjust the order of the patrol stops. Several preset positions can be added to the patrol stops. The camera can accept up to 40 patrol stops.

Save” button

The button is valid for “Auto pan/patrol speed”, “Enable IR control”, “Dwelling time” and “Patrol selections”. In other words, after changing these settings, and the “Save” button is not clicked, the new setting of the camera will not take effect.

39

Image 39
Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Hardware installation InstallationTo install in wireless LAN WCS-2060 Only To install in EthernetSoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View ConfigurationClient Settings Primary user’s capabilityView capabilities Tilt speed Pan/tilt control buttonsAs Play Pan speedPatrol PanClient settings Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images For Best Real-time Video ImagesOnly Quality Images Will Do Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Page Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Calibrate MaintenanceStatus LED TroubleshootingURL commands of the Network Camera Reset and restoreMethod GET/POST Get server parameter valuesReturn Set server parameter valuesYyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group SecurityBlank 192.168.0.99255.255.255.0 554 55585556 Open Live.sdp Group Wireless restartDefault Auto255.255.255.255 00000000Group IPFilter 0.0For 60Hz only 512000AAC4 for computer Gamr for mobile12200 Blank Blank 514 Camera ControlScript.vssx IP addressRecall Application page CGI commandEndtime WeekdayTimemethod BegintimeAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Upgrade firmwarePost data Page Networking Technical specificationsMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty