LevelOne FCS-1060, WCS-2060 user manual Definitions in Configuration

Page 26

Definitions in Configuration

Only the Administrator can access system configuration. Each category in the left column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may type the URL below the figure to directly enter the frame page of configuration. If the Administrator also wants to set certain options through the URL, read the reference appendix for details.

<url> http://<Network Camera>/setup/config.html

<Network Camera> is the domain name or original IP address of the Network Camera. <url> http://<Network Camera>/setup/system.html

<Network Camera> is the domain name or original IP address of the Network Camera.

26

Image 26
Contents LevelOne Before You Use This Product Table of Contents FTP Package Contents Installation Hardware installationTo install in Ethernet To install in wireless LAN WCS-2060 OnlySoftware Installation Page Page Check Network Settings Add Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability ConfigurationClient Settings Main Screen with Camera ViewView capabilities Pan speed Pan/tilt control buttonsAs Play Tilt speedPan PatrolClient settings Url http//Network Camera/client.html For Viewing by Mobile Phone Administrator’s capabilityFine-tuning for Best Performance Only Quality Images Will Do Somewhere Between Real-time and Clear ImagesFor Best Real-time Video Images Build a security application Protect Network Camera by passwordsOpening accounts for new users Software revision upgrade Page Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressRtsp Streaming Wlan Configuration WCS-2060 Only Tkip AES Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPUrl http//Network Camera/setup/mailftp.html Motion detection Application settings Method for sending snapshot System log Viewing system parameters Maintenance CalibrateReset and restore TroubleshootingURL commands of the Network Camera Status LEDGet server parameter values Method GET/POSTSet server parameter values ReturnAvailable parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank255.255.255.0 Blank192.168.0.99 5556 5545558 Auto Live.sdp Group Wireless restartDefault Open0.0 00000000Group IPFilter 255.255.255.255512000 For 60Hz only12200 AAC4 for computerGamr for mobile Blank Blank IP address Camera ControlScript.vssx 514Application page CGI command RecallBegintime WeekdayTimemethod EndtimeCapture single snapshot Account managementSystem logs Privilege=confPost data Configuration fileUpgrade firmware Page Technical specifications NetworkingMicrophone GNU General Public License GNU General Public License Page Page Page No Warranty