Lantronix LSW2F8 manual Features

Page 4

1.2 Features

▼The LSW2F8 provides two 100BASE-TX ports and eight 10BASE-T ports for Ethernet and Fast Ethernet connectivity

▼The LSW2F8/LSW2F16 comply with the IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet standards

▼An Uplink switch on the front panel enables the LSW switch to be cascaded to another 10Mbps or 100Mbps hub using a straight- through cable

▼Store-and-forward switching architecture for filtering bad packets

▼Total bandwidth up to 280Mbps (LSW2F8I) and 360Mbps (LSW2F16)

▼Automatic address learning with 8K addresses per port

▼MemoryÐLSW2F8: 1MB total

LSW2F16: 3MB total

▼Per-port frame filtering and forwarding capability

▼Filtering and forwarding rate 14880 packets per second for 10Mbps ports, 148800 per second for 100Mbps ports

▼Global Power and individual Collision, Link/Activity LEDs monitor system status

▼The internal power supply automatically adjusts to the voltage range of the AC power being supplied (100VAC/60Hz to 240VAC/50Hz), with no change in settings or fuse required

▼FCC Class A, CE, UL, CUL, TUV certifications

▼Five year limited warranty

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents LSW2F8, LSW2F16 Table of Contents Product Introduction Features Product Specifications Packing Checklist Planning Your NetworkFileserver Link Fileserver Link ApplicationBackbone Link LSW2F16Installation 3 10/100Mbps BridgingLSW2F8 Switch Front Panel Mounting Bracket Installation MountingConnecting the LSW Switch LSW2F16Power LED 10/100 Mbps LEDsFull/Col Full or Half Duplex/Collision LEDs Link/Activity LEDsLimited Warranty Page Declaration of Conformity Part no -140 Rev.A
Top Page Image Contents