Staple, Landscape: Adds a single staple to all of your landscape- oriented output.

Note

The Staple feature is available with an optional stacker & stapler. (Page 12.1)

Selecting the type of original (Text/Photo)

Press the Basic tab and select an appropriate original type.

Text: Use for originals containing mostly text.

Text/Photo: Use for originals with mixed text and photographs.

Photo: Use when originals are photographs.

Changing the darkness

This defines the degree of darkness. Use left/right arrows to change the level of light/dark in the printouts.

Using special copy features

On the Advanced tab or the Image tab of the Copy screen, you can select specific copy features.

ID card copying

The machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a business card.

1Place a single original face down on the scanner glass. (Page 4.1)

Note

The original must be placed on the scanner glass to use this feature.

2Press Copy from the Main screen.

3Press the Advanced tab > ID Copy.

4Press Start on the control panel.

Then the machine starts scanning the front side.

5Turn the original over and place it on the scanner glass.

6Press Start on the control panel to begin copying.

Note

• If the original is larger than the printable area, some portions may not be printed.

If this option is grayed out, select the Duplex option to 1 -> 1 Sided, the Output option to Collated.

2-up or 4-up copying (N-up)

The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of paper.

2

1

2-up copying

4-up copying

1Load the originals, face up, in the DADF. (Page 4.1)

Note

The originals must be loaded in the DADF to use this feature.

2Press Copy from the Main screen.

5.4 <Copying>

Page 41
Image 41
Samsung SCX-6X45 manual Using special copy features, Selecting the type of original Text/Photo, Changing the darkness