Option

Description

 

 

ID Stamp

This option is used to set words or a message

 

to print on your copies. Set this option On and

 

an input screen will be displayed, write your

 

message using the pop up keyboard.

 

 

Fax Setup

This machine offers you with various options to you for setting up the fax system. You can change the default settings for your preferences and needs.

1Press Machine Setup on the control panel.

2Press Admin Setting. When the login message pops up, enter password and press OK.

3Press the Setup tab > Fax Setup.

Note

The fax options are different from country to country depending on the international communication regulatory. If the display screen does not show or gray out some of the fax options explained herein, it means that the grayed out function does not supported in your communication environment.

Option

Description

 

 

Terminal ID

Enter the machine ID and fax number which will

 

be printed at the top of each page.

 

 

Remote Code

This feature works best when you are using an

 

extension telephone connected to the EXT

 

socket on the back of your machine. You can

 

receive a fax from someone you are talking to

 

on the extension telephone, without going to the

 

fax machine. (Page 6.4)

 

 

Error Correction

It helps with poor line quality and makes sure

Mode

any faxes you send are properly transmitted to

 

any other ECM-equipped fax machines.

 

Sending a fax using ECM may take more time.

 

 

Option

Description

 

 

Fax Initial Setup

You can set Receive Mode for Telephone, Fax

 

or Answering Machine/Fax, and Dial Type at

 

either DP (Dial Pulse) or MF (Multi Frequency).

 

When you select Answering Machine/Fax,

 

you can receive a fax while the line is being

 

used by the answering machine. (Page 6.4)

 

Contact your local telephone company for Dial

 

Type setting information.

 

 

Auto Answer

You can specify the number of times the

Delay

machine rings before answering an incoming

 

call.

 

 

Receive Header

Use this option to automatically print the page

 

number, date and time of fax reception at the

 

bottom of each page.

 

 

Secure Receive

You may need to prevent your received faxes

 

from being accessed by unauthorized people.

 

This feature restricts printing of received faxes

 

when the machine is unattended. If you select

 

this option to On, all incoming faxes go into

 

memory.

 

A four-digit Passcode is used when you want to

 

print out received faxes in memory. (Page 6.5)

 

 

Received Fax

When receiving a fax containing pages longer

Printing

than the paper loaded in the tray, the machine

 

can reduce the size of the original to fit the size

 

of the paper loaded in the machine. If this

 

feature is set to Off, the machine cannot reduce

 

the original to fit onto one page. The original will

 

be divided and printed in actual size on two or

 

more pages. If you set this option to On and set

 

the discard size to 10mm and the received data

 

is longer then the currently set paper in the tray,

 

the machine minuses the data that would have

 

been on the specified discard segment.

 

 

Redial

The machine can automatically redial a remote

 

fax machine, if it was busy. You can set the

 

number of redial attempts and an interval

 

between attempts. Selecting 0 for Redial

 

Attempts means that the machine will not use

 

this feature.

 

 

Speaker Volume

This controls the sound when a fax actually

(Audio Line

starts to transfer data. If this option is On, the

Monitor)

machine sounds from a fax starts until a fax

 

finishes. With Comm. the machine sounds only

 

until the communication is succeeded. No

 

sound with Off option.

 

 

9.4 <Machine status and advanced setup>

Page 68
Image 68
Samsung SCX-6X45 manual Fax Setup