Samsung SCX-6X45 manual Installing the software, Supported operating systems, Press Admin Setting

Supported operating systems

The following table shows the network environments supported by the machine:

Item	Requirements
Network interface	10/100 Base-TX
Network operating	Novell NetWare 4.x, 5.x, 6.x
system	Windows 98/Me/NT 4.0/2000/XP/2003
	Various Linux OS
	Macintosh 10.3 ~ 10.4
Network protocols	IPX/SPX
	TCP/IP
	EtherTalk
Dynamic addressing	DHCP, BOOTP
server

Configuring network protocol via the machine

You can setup TCP/IP Network parameters please follow the steps listed below. To setup Netware and Apple Talk please refer to the on-line user's guide located on the Network Utilities CDs.

1Make sure your machine is connected to the network with an RJ-45 Ethernet cable.

2Make sure you turned on the machine.

3Press Machine Setup on the control panel.

4Press Admin Setting.

5When the login message appears, enter password. Touch the password input area, then the question marks appears. Use the number keypad on the control panel to enter the password. Once the password is entered, press OK. (Factory setting:1111)

6Press the Setup tab > Network Setup.

7Select TCP/IP Protocol.

8Press IP Setting.

9Select Static and then enter IP Address, Subnet Mask and Gateway address fields. Touch the input area then, enter addresses by number keypad on the control panel.

Note

Contact the network administrator, if you are not sure how to configure.

10Press OK.

Note

You can also set up the network settings through the network administration programs. Refer to the user’s guide on the Network Utilities CD that came with your machine.

•SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network printers from any site with corporate internet access.

•SyncThru™ Web Service: Web server embedded on your network print server, which allows you to:

-Configure the network parameters necessary for the machine to connect to various network environments.

-Customize email settings and set up address book for scanning to email.

-Customize server settings and set up address book for scanning to the FTP or SMB servers.

-Customize printer, copy, and fax settings.

•SetIP: Utility program allowing you to select a network interface and manually configure the IP addresses for use with the TCP/ IP protocol.

Installing the software

You have to install the machine software for printing, copying, faxing, and scanning. The software includes drivers, applications, and other user friendly programs.

Note

The following procedure is based on the Windows XP operating system. The procedure and popup window which appears during the installation may differ depending on the operating system, the printer feature, or the interface in use. (See Software section.)

1Make sure that the network setup for your machine is completed. (Page 3.1) All applications should be closed on your computer before beginning installation.

2Insert the Printer Software CD-ROM into your CD-ROM drive.

3The CD-ROM should automatically run, and an installation window appears. Click Next.

3.2 <Getting Started>