Option |
| Description |
|
| |
Energy Saver | You can reduce energy consumption by setting | |
| these features. Energy Saver has three | |
| options, first Low Power Mode to Sleep Mode | |
| turns off the scanner lamp under the glass. And | |
| Power Save turns off all the fans within the | |
| machine after a certain time. Standby to Low | |
| Power Mode turns off the fans within the | |
| machine except a core fan for the fuser unit. | |
| (Page 3.4) | |
|
| |
Tray | This feature allows you to select the tray and | |
Management | paper you use for a printing job. Paper size, | |
| paper type, and paper color options are | |
| adjusted here. Tray Confirmation Message is | |
| to activate the window asking whether you set | |
| the paper size and type for the just opened tray. | |
| • Auto Tray Switch: If tray1 and tray2 are filled | |
|
| with letter size paper, when tray1 is empty |
|
| and this option is On, then the machine |
|
| continues printing with paper in tray2. |
| • | Auto Continue: When the paper is |
|
| mismatched, meaning that tray1has filled with |
|
| the letter size paper, but the printing job |
|
| needs A4 size paper, the machine will wait for |
|
| 30 seconds to paper in tray1 with proper |
|
| sized paper. After 30 seconds, the machine |
|
| automatically starts printing with Letter sized |
|
| paper. |
|
| |
Altitude | Print quality is affected by atmospheric | |
Adjustment | pressure, which atmospheric pressure is | |
| determined by the height of the machine above | |
| sea level. This feature lets you adjust the | |
| altitude in a height district. Higher altitude | |
| location need to set this feature to High 3, | |
| which affects print quality. | |
|
| |
Output Options | Output Options is for, when the staples run | |
| out, you to let the machine stop processing and | |
| wait to refill the staples or continue the job. If | |
| you set Within Job Offsetting to On, the | |
| output paper is placed and sorted by printout- | |
| sets. | |
|
| |
Contention | This feature lets you to select the priority | |
Management | between copy jobs and print jobs. | |
| • | Priority: Set the priority by numbering the |
|
| job. The machine starts from the least to the |
|
| highest number in order. |
| • | First In, First Out: The machine does an |
|
| asked job in order. |
|
|
|
Option | Description |
|
|
Sound | You can adjust the loudness of the machine |
| sound. Press Fault to adjust the machine's |
| error sound. Select Conflict if you pressed the |
| wrong option. Press Selection to sound |
| whenever you press the selection from your |
| touch screen. |
|
|
Supplies | The machine gives you the notification of the |
Management | drum and toner to reorder, and resets the used |
| fuser counter, bias transfer roller, feed roller and |
| document feeder friction pad counter. |
|
|
Machine Test | The machine prints the test image patterns |
| using Image Quality Test Patterns. |
|
|
On Demand | You can set the machine to delete previous job |
Overwrite | information on HDD as you store new job |
| information. To activate this feature, go to |
| Admin Setting > the Setup tab > Optional |
| Service and set the On Demand Image |
| Overwrite option to Enable. After activating |
| this feature you can overwrite a HDD by |
| pressing Start in the display. |
|
|
Copy Setup
For copy output, you can set up several options in advance.
1Press Machine Setup on the control panel.
2Press Admin Setting. When the login message pops up, enter password and press OK.
3Press the Setup tab > Copy Setup.
Option | Description |
|
|
Page Number | If you select this option On, each copy will |
| include the page number on the bottom of each |
| page. |
|
|
Time & Date | Set this option On in order to print the date and |
| time on each copy, set from the General tab. |
|
|
9.3 <Machine status and advanced setup>
