2Press a, b, c, d, e, f, g.

3Press @.

4Press a, b, c.

5Press . and press c, o, m.

Note

to enter contents in other fields, press

 

on the

keyboard.

 

 

 

 

6Press OK after finishing all the contents.

Scanning originals and sending via Samsung

Network Scan Manager (NetScan)

You can scan an image on the machine via the Network Scan program which is installed in your networked computer.

Preparation for network scanning

Make sure the printer software is installed on your computer using the Printer Software CD-ROM, since the printer software and should include the Network Scan program. See page 3.2 for detailed information on installation steps.

1In Windows, select Start > Programs > Samsung Network Printer Utilities > Network Scan > Network Scan.

The Samsung Network Scan Manager window opens.

2Click the Add Device button.

3Click Next.

4Select Connect to this scanner and enter the IP address of your machine.

Or select Browse for a scanner. (recommended) to show a list of scanners on your network.

5Click Next.

6Select your machine from the list and enter a name, user ID, and PIN (Personal Identification Number) for the machine.

Note

• The model name of your machine is automatically entered as the scanner name, but it can be changed upon your need.

The ID can be entered up to 8 characters. The first character must be a letter.

The PIN must be of 4 digits.

7Click Next.

8Click Finish.

Your machine is added to the scanner list of the Network Scan program and you can now scan images through the network.

Note

You can change the scanner properties of your machine and the scan settings from the Samsung Network Scan Manager window. Click Properties and set the options in each tab.

Scanning and sending via NetScan

1Make sure that your machine and the computer are connected to a network and Samsung Network Scan Manager is running on the computer.

2Place the originals face up in the DADF. Or you can place a single original document face down on the scanner glass.

3Press Scan from the Main screen.

Note

If the authentication message shows, enter User Name and Password. This message shows only when the network administrator has set the authentication in SyncThru Web Service. (Page 10.6)

4Press NetScan.

5When the authentication message pops up, enter ID and Password. ID and Password that are which you have entered during the configuration of the Network Scan program. (Page 7.5)

When login is completed, the screen shows the NetScan server address which is the networked computer. Additionally, this shows Application list that is configured in Samsung Network Scan Manager.

6Select one from the application list and press Select.

7Press Start on the control panel to start scanning.

8The original will be scanned and sent to your computer.

Scanning originals and sending via SMB/ FTP

(Scan to Server)

You can scan an image and send it to a total of 5 destinations via the SMB or FTP.

Preparation for scanning to SMB/FTP

Select the folder and share it with the machine in order to receive the scanned file.

Note

The next steps are for SMB server setting using SyncThru Web Service, and the setting for FTP server is the same as SMB. Apply the same steps for setting up the FTP server.

7.5 <Scanning>

Page 60
Image 60
Samsung SCX-6X45 manual Scanning originals and sending via SMB/ FTP Scan to Server, Preparation for network scanning