5.6 <

Copying>
Note
To remove shadows of a book edge, press the Image tab >
Erase Edge > Book Center and Edges Erase.
3Press the Advanced tab > Book Copy.
4Select the binding option.
•Off: Disables this feature.
•Left Page: Prints left page of the book.
•Right Page: Prints right page of the book.
•Both Page: Prints both facing pages of the book.
5Press OK.
6Press Start on the control panel to begin copying.
Booklet copying
The machine automatically prints on both sides of the paper, when folded,
which produces a booklet with all of the pages in the correct sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
1Load the originals face up in the DADF. (Page4.1)
Note
The originals must be placed in the DADF in order to use this
feature.
2Press Copy from the Main screen.
3Press the Advanced tab > Booklet.
4Press On to activate this feature.
5Press OK.
6Press Start on the control panel to begin copying.
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio,
JIS B5, ISO B5, Executive, A5 and Statement sized pape r.
Cover copying
The machine automatically adds covers to your copied set using stock
taken from a different tray. Covers must be the same size and orientation
as the main body of the job.
1Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page4.1)
2Press Copy from the Main screen.
3Press the Advanced tab > Covers.
Note
Once you have set the Paper Supply option to Auto, you
cannot use this feature.
4Press On to use this feature, and select detailed settings for each
option.
•Position: Selects whether the cover will be placed at the front,
back, or both.
•Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
•Paper Source: Select the paper tray, where the cover sheet is
loaded.
5Press OK.
6Press Start on the control panel to begin copying.
Transparency copying
When you prepare transparencies for presentations, use this feature to
copy the information.
Note
Before you start this special copy job, set the tray's Paper Types
and Paper Size to Transparency.(Page 4.8)
1Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page4.1)
2Load the right-sized transparencies into the tray you have set.
3Set the paper type to Transparency.
4Press Copy from the Main screen.
5Press the Advanced tab > Transparencies.
6Select Transparencies option.
•No Separator: Does not place separator sheets between
transparencies.
•Blank Sheet: Places a blank sheet between transparencies.
•Printed Sheet: Places the same image on the divider sheets as
printed on the transparency.
7Select media sources, in case you selected either Blank Sheet or
Printed Sheet.
8Press OK.
9Press Start on the control panel to begin copying.