If the installation window does not appear, click Start > Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

• Select a language from the drop-down list, if necessary.

4Select Typical installation for a network printer, and then click Next.

5The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.

If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.

To verify your printer’s IP address or the MAC address, print a Network Configuration page. (Page 10.1)

To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.

Note

• If you are not sure of IP address, contact your network administrator or print network information. (Page 10.1)

If you cannot find your machine in network, please turn off the firewall and click Update.

6After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.

Note

If your printer does not work properly after the installation, try to reinstall the printer driver. See Software section.

Machine's basic settings

After installation is complete, you may want to set the machine's default settings. Check the next explanation if you would like to set or change values.

Setting the authentication password

To set your machine up or change the settings, you have to login. To change password, follow the next steps.

1Press Machine Setup on the control panel.

2Press Admin Setting.

3.3 <Getting Started>

Page 27
Image 27
Samsung SCX-6X45 manual Machines basic settings, Setting the authentication password