13.2 <

Installing accessories>
6Push the DIMM straight into the DIMM slot until it snaps into place.
Make sure the latches fit over the notches located on either side of
the DIMM.
7Replace the control board cover.
8Reconnect the power cord and printer cable, and turn the machine
on.

Activating the added memory in the PS printer

properties

After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
1Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see
Software section.
2Click the Windows Start menu.
3For Windows 98/Me/NT4.0/2000, select Settings and then
Printers.
For Windows XP/2003, select Printers and Faxes.
4Select the Samsung SCX-6x45 Series PS printer.
5Click the right mouse button on the machine i con and select
Properties.
6For Windows98/Me, select Device Options.
For WindowsNT 4.0/2000/XP/2003, select Device Settings.
7Select the amount of memory you installed from
Printer Memory
in
the
Installable Options
section.
For Windows 98, select
Installable Options
> VMOption > change
setting for:VMOption > change memory.
8Click OK.
Replacing the Stapler
When the stapler is completely empty, the message for installing the
staple cartridge appears on the display sc reen.
1Open the finisher cover.
2Pull the stapler unit out.