
13 Installing accessories
Your machine is a
This chapter includes:
•Precautions to take when installing accessories
•Installing a memory DIMM
•Replacing the Stapler
•Enabling Fax feature after installing the fax option kit
Precautions to take when installing accessories
Disconnect the power cord
Never remove the control board cover while the power is being supplied on.
To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external accessories.
Discharge static electricity
The control board and internal accessories (network interface card or memory DIMM) are sensitive to static electricity. Before installing or removing any internal accessories, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing the installation, repeat this procedure to discharge any static electricity again.
Installing a memory DIMM
Your machine has a dual
Your machine has 256 MB of memory which can be expanded to 384 MB.
The order information is provided for optional memory DIMM. (Page 12.1)
1Turn the machine off and unplug all cables from the machine.
2Open the control board cover by grasping it and slide toward you.
1
1 control board cover
3Completely open the latch on each side of the DIMM slot. Remove the preinstalled memory DIMM.
1
2
1 latch
2 memory DIMM
4Take out a new memory DIMM from the plastic bag.
5Holding the memory DIMM by the edges, align the notches on the memory DIMM with the grooves on the memory DIMM slot.
Note
The notches and grooves illustrated above may not match those on an actual DIMM and its slot.
13.1 <Installing accessories>