Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper Block

CAUTION

Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.

The location of the desktop board’s BIOS configuration jumper is shown in Figure 17.

1

3

J9J4

 

OM16340

Figure 17. Location of the BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 8 shows the jumper settings for the Setup program modes.

Table 8. Jumper Settings for the BIOS Setup Program Modes (J9J4)

Jumper Setting

1

3

1

3

1

3

Mode

Description

Normal (default) (1-2)

The BIOS uses the current configuration and passwords for

 

booting.

Configure (2-3)

After the Power-On Self-Test (POST) runs, the BIOS displays

 

the Maintenance Menu. Use this menu to clear passwords.

Recovery (None)

The BIOS recovers data from a recovery diskette in the event

 

of a failed BIOS update.

 

 

45

Page 45
Image 45
Intel D865GRH manual Setting the Bios Configuration Jumper Block, Jumper Settings for the Bios Setup Program Modes J9J4