Intel D865GRH manual LAN Subsystem Optional, LAN Subsystem Software RJ-45 LAN Connector LEDs

Intel Desktop Boards D865GRH Product Guide

Related Links

Go to the following link or sections in this manual for more information about:

•Audio drivers and utilities, http://support.intel.com/support/motherboards/desktop/

•Installing the front panel audio solution, page 39 in Chapter 2

•Setting up the Flexible 6-Channel Audio with Jack Sensing, page 41 in Chapter 2

LAN Subsystem (Optional)

The optional LAN provides a Fast PCI LAN subsystem. The LAN subsystem provides the following functions:

•10/100/1000 Gigabit Ethernet LAN (Intel 825470EI)

•Support for RJ-45 connector with status indicator LEDs

•Programmable transit threshold

•Configurable EEPROM that contains the MAC address

LAN Subsystem Software

For LAN software and drivers, refer to the D865GRH link on Intel’s World Wide Web site at: http://support.intel.com/support/motherboards/desktop

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector. Table 4 describes the LED states when the board is powered up and the 10/100/1000 Gigabit Ethernet LAN subsystem is operating.

Table 4. RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs

LED Color	LED State	Indicates
Bi-color LED	Off	10 Mbit/sec data rate is selected.
	Green	100 Mbit/sec data rate is selected.
	Yellow	1 Gbit/sec data rate is selected.
Green	Off	LAN link is not established.
	On (steady state)	LAN link is established.
	On (brighter and	The computer is communicating with another computer on the
	pulsing)	LAN.

18