Intellinet Network Solutions 523875 Pre-Shared Key Format Select Passphrase or Hex 64 characters

digits or five ASCII characters are needed if 64-bit WEP is used; 26 hexadecimal digits or 13 ASCII characters if 128-bit WEP is used.

-Pre-Shared Key Format: Select “Passphrase” or “Hex” (64 characters).

-Pre-Shared Key: Pre-Shared Key serves as a password. Key in an 8- to 63-character string to set the password or leave it blank, in which case the 802.1x Authentication will be activated. Make sure the same password is used on the client end.

-Group Key Life Time: Enter the number of seconds that will elapse before the group key changes automatically. The default is 86,400 seconds.

•Enable Pre-Authentication:This enables secure fast roaming without noticeable signal latency. Pre-authentication provides a way to establish a PMK (pairwise master key) security association before a client connects, with the advantage being that the client reduces the time that it’s disconnected to the network.

-Authentication RADIUS Server: RADIUS is an authentication authorization and accounting client-server protocol. The client is a network access server which has access to a user database with authentication information and which desires to authenticate its links.

-Port: Enter the RADIUS server’s port number provided by your ISP. The default is 1812.

-IP Address: Enter the RADIUS server’s IP address provided by your ISP.

-Password: Enter the password that the AP shares with the RADIUS server.

•Enable Accounting: Check to enable this function.

-Accounting RADIUS Server: Enter the port, IP address and password as above.

•Apply Changes: Click to save and apply the current settings.

•Reset: Click to clear and reset the current settings.

10CONFIGURATION VIA THE WEB