Intellinet Network Solutions 523875 user manual Other

Page 28

LAN Interface Setup

IP Address: This is the device’s local address. (Default: 192.168.1.254.)

Subnet Mask: Default: 255.255.255.0.

Default Gateway: Shows the default gateway IP address.

DHCP: Select “Server” from the drop-down menu to enable the router to distribute IP addresses (DHCP server) and activate the Server IP field to accept a starting IP address; select “Disable” to disallow such distribution.

Server IP: This is the starting IP address when “Server” is selected in the “DHCP” drop-down menu.

DHCP Client Range: This is the starting address of this local IP network address pool, a continuous IP address segment. Keeping the default value as 192.168.1.1 should work in most cases, as should the default maximum of 253.

Show Client: Click to show the Active DHCP Client table.

DNS Server: Enter the domain name service IP address.

Apply Changes: Click to save and apply any changes in the settings.

Reset: Click to restore settings to default values.

other

This section offers a choice of three screens: Upgrade Firmware, Reboot and Password Setup.

28CONFIGURATION VIA THE WEB

Image 28

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Initial setup Led indicatorsHardware Connections Operation modesLogin Configuration via the web Mode operation/Wireless ModeAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Advanced Settings Click FragmentInactivity Time The default setting is 30,000 ms Disable Select to disable this modeReset Click Reset to clear any/all selected items MAC Address fieldGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Enable Virtual Servers Select as needed Local IP AddressDMZ Click Setup to display the DMZ screen and options Enable Web Server Access via WANEnable MAC Filtering Current Filter TableDelete Selected MAC Address ForEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Tx Burst Click to enable the Tx burst mode Enable WatchDog Check to enable the WatchDog functionRefresh Click to update the display StatusTcp/ip Other Reboot Click to reboot the hardware Computer configuration Tcp/ip network settingsComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows From the router ISP then click OKTCP/IP Settings for Windows XP ISP then click OK Internet Access On the Connection tab, click SetupClick Edit set the Protocol to Dhcp save this data LinuxWireless LANs & Station Configuration DSL M odems ISPTroubleshooting Problem The wireless connection speed is very slow Specifications Standards