Intellinet Network Solutions 523875 Enable Virtual Servers Select as needed, Local IP Address

Page 19

•DNS 1–3:Enter the DNS server IP address(es) provided by your ISP, or specify your own preferred DNS server IP address(es). NOTE: The DNS 2 and DNS 3 servers are optional. They will be used if/when the DNS 1 server fails.

•Respond to WAN Ping: Select in order for the router to respond to ping commands originating from the

WAN (Internet). NOTE: As a security precaution, this option should not be selected.

•Enable UPnP: Universal Plug and Play (UPnP) allows Windows Me and XP to automatically configure the router for various Internet applications, such as gaming and videoconferencing. To use UPnP, select “Enable UPnP.”

•Save: Click to save and apply the current settings.

•Reset: Click to clear and reset the current settings.

•Close: Click to exit the current settings.

Virtual Server: Click “Setup” to display the Virtual Servers screen and options.

•Enable Virtual Servers: Select as needed.

•Servers: Make a selection from the pull-down menu.

•Local IP Address:

Enter the local server’s IP address.

•Protocol: Select the protocol (“TCP,” “UDP” or “Both”) used by the remote system or service.

•Port Range: For TCP and UDP services, enter the beginning of the range of port numbers used by the service. If the service uses

CONFIGURATION VIA THE WEB	19

Image 19

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Operation modes Initial setupLed indicators Hardware ConnectionsLogin Mode operation/Wireless Mode Configuration via the webAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Fragment Advanced Settings ClickDisable Select to disable this mode Inactivity Time The default setting is 30,000 msMAC Address field Reset Click Reset to clear any/all selected itemsGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Local IP Address Enable Virtual Servers Select as neededEnable Web Server Access via WAN DMZ Click Setup to display the DMZ screen and optionsMAC Address For Enable MAC FilteringCurrent Filter Table Delete SelectedEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Enable WatchDog Check to enable the WatchDog function Tx Burst Click to enable the Tx burst modeStatus Refresh Click to update the displayTcp/ip Other Reboot Click to reboot the hardware Tcp/ip network settings Computer configurationComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows ISP then click OK From the routerTCP/IP Settings for Windows XP ISP then click OK On the Connection tab, click Setup Internet AccessLinux Click Edit set the Protocol to Dhcp save this dataWireless LANs & Station Configuration ISP DSL M odemsTroubleshooting Problem The wireless connection speed is very slow Standards Specifications