Intellinet Network Solutions 523875 user manual Login

Page 7

GW Mode

When GW mode is selected, the access point will enter the gateway mode, and the wireless connection will be set up from a point-to-point local LAN to a point-to- multipoint WAN.

Client Mode (Infrastructure)

If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connected to a computer so that the computer can send packets from wired end to wireless interface.

LOGIN

1.Turn on your computer and connect it to the Wireless G Broadband Travel Router with an Ethernet cable.

2.Make sure your wired station is set to the same subnet as the router:

192.168.1.254.

3.Start your Web browser. In the “Address” field on the menu bar, enter “http://192.168.1.254.”

NOTE: No username or password is required for the initial login; you do, however, have the option of setting up a username and password for added security. (See the Password subsection in Configuration via the Web/Other.)

INITIAL SETUP

Image 7

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Operation modes Initial setupLed indicators Hardware ConnectionsLogin Mode operation/Wireless Mode Configuration via the webAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Fragment Advanced Settings ClickDisable Select to disable this mode Inactivity Time The default setting is 30,000 msMAC Address field Reset Click Reset to clear any/all selected itemsGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Local IP Address Enable Virtual Servers Select as neededEnable Web Server Access via WAN DMZ Click Setup to display the DMZ screen and optionsMAC Address For Enable MAC FilteringCurrent Filter Table Delete SelectedEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Enable WatchDog Check to enable the WatchDog function Tx Burst Click to enable the Tx burst modeStatus Refresh Click to update the displayTcp/ip Other Reboot Click to reboot the hardware Tcp/ip network settings Computer configurationComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows ISP then click OK From the routerTCP/IP Settings for Windows XP ISP then click OK On the Connection tab, click Setup Internet AccessLinux Click Edit set the Protocol to Dhcp save this dataWireless LANs & Station Configuration ISP DSL M odemsTroubleshooting Problem The wireless connection speed is very slow Standards Specifications