Intellinet Network Solutions 523875 user manual Computer Configuration

Page 33

3.On the IP Address tab, select the network card for your LAN from the “Adapter” drop-down menu.

4.To use DHCP, select “Obtain an IP address FROM A DHCP Server.” This is the default Windows setting, which is recommended so the router will act as a DHCP server. Restart the PC to ensure it obtains an IP address from the router.

If the PC is already configured, select “Specify an IP Address” and check with your network administrator before making the following changes.

COMPUTER CONFIGURATION	33

Image 33

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Led indicators Initial setupHardware Connections Operation modesLogin Mode operation/Wireless Mode Configuration via the webAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Fragment Advanced Settings ClickDisable Select to disable this mode Inactivity Time The default setting is 30,000 msMAC Address field Reset Click Reset to clear any/all selected itemsGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Local IP Address Enable Virtual Servers Select as neededEnable Web Server Access via WAN DMZ Click Setup to display the DMZ screen and optionsCurrent Filter Table Enable MAC FilteringDelete Selected MAC Address ForEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Enable WatchDog Check to enable the WatchDog function Tx Burst Click to enable the Tx burst modeStatus Refresh Click to update the displayTcp/ip Other Reboot Click to reboot the hardware Tcp/ip network settings Computer configurationComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows ISP then click OK From the routerTCP/IP Settings for Windows XP ISP then click OK On the Connection tab, click Setup Internet AccessLinux Click Edit set the Protocol to Dhcp save this dataWireless LANs & Station Configuration ISP DSL M odemsTroubleshooting Problem The wireless connection speed is very slow Standards Specifications