Intellinet Network Solutions 523875 user manual TCP/IP Settings for Windows

Page 36

TCP/IP Settings for Windows 2000

1.Go to the Control Panel ‡ Network ‡ Dial-Up Connection, then right-click the Local Area Connection icon and select Properties.

2.On the General tab, select the TCP/IP protocol and click “Properties.”

3.To use DHCP, select “Obtain an IP address automatically.” This is the default Windows setting, which is recommended so the router will act as a DHCP server. Restart the PC to ensure it obtains an IP address

36COMPUTER CONFIGURATION

Image 36

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Initial setup Led indicatorsHardware Connections Operation modesLogin Configuration via the web Mode operation/Wireless ModeAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Advanced Settings Click FragmentInactivity Time The default setting is 30,000 ms Disable Select to disable this modeReset Click Reset to clear any/all selected items MAC Address fieldGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Enable Virtual Servers Select as needed Local IP AddressDMZ Click Setup to display the DMZ screen and options Enable Web Server Access via WANEnable MAC Filtering Current Filter TableDelete Selected MAC Address ForEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Tx Burst Click to enable the Tx burst mode Enable WatchDog Check to enable the WatchDog functionRefresh Click to update the display StatusTcp/ip Other Reboot Click to reboot the hardware Computer configuration Tcp/ip network settingsComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows From the router ISP then click OKTCP/IP Settings for Windows XP ISP then click OK Internet Access On the Connection tab, click SetupClick Edit set the Protocol to Dhcp save this data LinuxWireless LANs & Station Configuration DSL M odems ISPTroubleshooting Problem The wireless connection speed is very slow Specifications Standards