Intellinet Network Solutions 523875 user manual Gateway/GW Mode Settings

Page 14

Gateway/GW Mode Settings

Alias Name: Displays the device name.

Disable Wireless LAN Interface: By selecting this option, you won’t be able to make a wireless connection with this portable router in your network; i.e., this device will not be visible by any wireless station.

Band: The drop-down menu offers three options:

•2.4 GHz (B) — 802.11b supported rate only.

•2.4 GHz (G) — 802.11g supported rate only.

•2.4 GHz (B+G) — Both 802.11b and 802.11g supported rate. The default is 2.4 GHz (B+G) mode.

SSID: The service set identifier (SSID) differentiates one WLAN from another; therefore, all access points and devices attempting to connect to a specific WLAN must use the same SSID. It is case-sensitive and

14	CONFIGURATION VIA THE WEB

Image 14

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Hardware Connections Initial setupLed indicators Operation modesLogin Configuration via the web Mode operation/Wireless ModeAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Advanced Settings Click FragmentInactivity Time The default setting is 30,000 ms Disable Select to disable this modeReset Click Reset to clear any/all selected items MAC Address fieldGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Enable Virtual Servers Select as needed Local IP AddressDMZ Click Setup to display the DMZ screen and options Enable Web Server Access via WANDelete Selected Enable MAC FilteringCurrent Filter Table MAC Address ForEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Tx Burst Click to enable the Tx burst mode Enable WatchDog Check to enable the WatchDog functionRefresh Click to update the display StatusTcp/ip Other Reboot Click to reboot the hardware Computer configuration Tcp/ip network settingsComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows From the router ISP then click OKTCP/IP Settings for Windows XP ISP then click OK Internet Access On the Connection tab, click SetupClick Edit set the Protocol to Dhcp save this data LinuxWireless LANs & Station Configuration DSL M odems ISPTroubleshooting Problem The wireless connection speed is very slow Specifications Standards