Intellinet Network Solutions 523875 Initial setup, Hardware Connections, Led indicators

Page 6

initial setup

Hardware Connections

1.Connect the Wireless G Broadband Travel Router to a power outlet.

2.Connect one end of the Ethernet cable to the router and the other end to your desktop or notebook computer.

led indicators

Power
Wireless
Ethernet


Power (green)	Solid when device is on.
Wireless (blue)	Solid when device is on.
	Flashing when receiving/sending data.

Ethernet (green) Solid when Ethernet cable is connected.

Flashing when receiving/sending data.

operation modes

The router features three operation modes — AP (access point), GW (gateway) and Client Infrastructure — and is configured at the factory. To change the settings in order to employ more advanced configurations or change the mode of operation, use the included Web-based utility as described in subsequent sections of this manual.

AP Mode

When acting as an access point, the router connects all stations (desktop/notebook with wireless network adapter) to a wired network. All stations can have Internet access if only the router is connected to the Internet.

INITIAL SETUP

Image 6

Contents Model Page Lifetime Warranty FCC RF Radiation Exposure Statement Table of contents Hardware Connections Initial setupLed indicators Operation modesLogin Configuration via the web Mode operation/Wireless ModeAlias Name Displays the device name Pre-Shared Key Format Select Passphrase or Hex 64 characters Advanced Settings Click FragmentInactivity Time The default setting is 30,000 ms Disable Select to disable this modeReset Click Reset to clear any/all selected items MAC Address fieldGateway/GW Mode Settings Enable Pre-AuthenticationThis enables secure fast roaming RTS Threshold This is a mechanism implemented to prevent Inactivity Time The default setting is 30,000 ms Disable Select to disable this mode Enable Virtual Servers Select as needed Local IP AddressDMZ Click Setup to display the DMZ screen and options Enable Web Server Access via WANDelete Selected Enable MAC FilteringCurrent Filter Table MAC Address ForEncryption Make a selection from the pull-down menu Use 802.1x Authentication Fragment Threshold Tx Burst Click to enable the Tx burst mode Enable WatchDog Check to enable the WatchDog functionRefresh Click to update the display StatusTcp/ip Other Reboot Click to reboot the hardware Computer configuration Tcp/ip network settingsComputer Configuration TCP/IP Settings for Windows NT Computer Configuration Computer Configuration Computer Configuration TCP/IP Settings for Windows From the router ISP then click OKTCP/IP Settings for Windows XP ISP then click OK Internet Access On the Connection tab, click SetupClick Edit set the Protocol to Dhcp save this data LinuxWireless LANs & Station Configuration DSL M odems ISPTroubleshooting Problem The wireless connection speed is very slow Specifications Standards