Asanté FriendlyNET™ GigaNIX™ 1000TA/TPC 13
Step 5 The installation process is complete. Click on the Restart button to
restart your computer.
After installing the software and restarting your computer, you will need to
configure AppleTalk and TCP/IP for use with the GigaNIX Gigabit Ethernet
adapter. Unless you change your machine’s setup, this procedure will only have
to be performed once. After that, your Macintosh will be able to locate and load
the adapter driver automatically whenever you reset or power-up your Mac. Refer
to the following sections for information on configuring your adapter to utilize
AppleTalk and TCP/IP.
3.2 Configuring GigaNIX for AppleTalk
Your Macintosh utilizes the AppleTalk protocol to communicate with other
Macintoshes running Personal Filesharing. In order for your Gigabit Ethernet
adapter to utilize AppleTalk, you must select your adapter in the AppleTalk
Control Panel. Additional options may be selected based on the needs of the
system, using options documented in the Apple network system administration
guides and manuals. Follow the steps below to configure your Gigabit Ethernet
adapter for AppleTalk:
Step 1 Pull-down the Apple (apple icon) menu and select the AppleTalk
Control Panel item to open a window that should look similar to the one
shown below